Chain Link Fence Commercial Cox Gate Hinge 6 5/8" x 1 5/8" or 2" (1 7/8 OD) (Pressed Steel Galvanized)

Used in commercial and industrial chain link gate applications, the cox gate hinge is often referred to as a box or butt hinge and is designed to secure a 1 5/8" or 2" (1 7/8 OD) gate frame to a 6 5/8" fence post.

Part Number: CHINGE658
$38.4580 each
$38.4580 each
OR
 

Details

Chain Link Fence Commercial Cox Gate Hinge 6 5/8" x 1 5/8" or 2" (1 7/8 OD) (Pressed Steel Galvanized)

The Chain Link Fence Commercial Cox Gate Hinge, sometimes referred to as a box or butt hinge, is used to attach a gate frame to a fence post. This gate hinge is made of durable galvanized steel, which fits a 6 5/8" post and a 1 5/8" or 2" (1 7/8 OD) gate frame. These hinges are used on commercial and industrial chain link gates, allowing the gate to open 90 degrees in either direction. Note that two hinges are required per gate.

To install, simply remove the bolts on the collar and place them around the fence post. Then, remove the bolts on the gate frame collar and place them around the gate frame. Once both hinges are attached, place the gate frame collar around the gate frame and replace the bolts. Tighten the bolts as needed.

If you would like your gate to open a full 180 degrees, please consider a 180 Degree Offset Adapter.

Features

  • Easy to install
  • Built for long-lasting performance
  • Allows gate to swing 90 Degrees in either direction
  • Commercial and Industrial Applications

Specifications

  • Fits 6 5/8" Posts
  • Pressed Galvanized Steel
  • Fits 1 5/8" or 2" (1 7/8 OD) Gate Frames
SKU CHINGE658
Material Type Pressed Steel
Hinge Type Cox Hinge
Gate Frame Size 1 5/8"
Finish Galvanized
Post Size 6 5/8" [6 5/8" OD]