Titan Sleeve Size Versus Collar Size
Post driver adapter sleeves and collars are designed to impact the effectiveness of your post-driver. Sleeves, sleeves with pads, and collars can all be used for the installation of posts, pipes, stakes, rods, and more. These products range in size, measured as diameter, generally corresponding to post size. Post drivers need sleeves and collars; both guide material within the barrel, but a collar will provide additional protection for the driver's exterior.
Sleeves & Sleeves with Pads
Sleeves are placed inside the post driver and are designed to guide material into the center of the barrel to create a more practical impact when driven into the ground. Referred to as adapter parts, sleeves, and sleeves with pads are designed to grip material inside the barrel for a more effective post-pounding impact. Sleeves with pads will subtract the need for a collar. All sleeves are made of industrial-grade poly and specific to the post driver model and post size.
Collars are placed over the post driver's barrel and are designed to guide material into the center of the barrel. Often called reducer collars, these will essentially reduce the size of the barrel for various sizes of posts, pipes, stakes, rods, etc. All collars are threaded to provide an optimal fit and made of high-density plastic to last through the toughest projects.
Sleeve and collar sizes depend on the outside diameter of the post, pipe, stake, rod, etc., inserted into the post driver. Below are charts for corresponding sleeve or collar sizes to post, pipe, stakes, rod, etc., size.
|Sleeve Size||Post Driver Size Range|
|3/4"||1/2" - 3/4"|
|1"||3/4" - 1"|
|1 3/4"||1 3/4"|
|2 1/4"||2" - 2 1/4"|
|2 1/2"||2 1/4" - 2 1/2"|
|Collar Size||Post Size Range|
|1 4/5"||1" - 1 4/5"|
|2"||1" - 2"|
|3"||2" - 3"|
|4"||3" - 4"|
If you need further information before deciding which post driver adapter parts you need, please get in touch with our friendly sales staff. They are happy to help in any way they can!Contact Us