Types Of Chain Link Fence Tension Bands
You may have stumbled upon tension bands if you've been searching for the right parts for a chain link fence. While many people confuse these with brace bands, tension bands also attach to the terminal post of a chain link fence and can be used alongside a tension bar to attach the fabric. Remember that brace bands go before tension bands on a chain link fence.
While tension bands are necessary to install a chain link fence, it can get confusing to understand the difference between beveled, heavy, and standard brace bands. If you would like to learn more about these tension bands, this article will help clear up any misinformation you may have heard.
Typical Tension Band Applications
Standard Tension Band
- Standard Residential/Commerical Applications
- Manufacturing Companies
- Rural Chain Link Fences
Heavy Tension Band
- Correctional Facilities
- High-Security/Heavy-Duty Applications
- Fences On Country Or District Borders
Beveled Tension Band
- Industrial/GovernmentBuildings
- Standard/Heavy-Duty Applications
- Used With Large Fence Posts
- HasBeveled Edges
Standard Tension Bands
Standard tension bands are usually used for residential chain link fences. These tension bands attach chain link fabric to the end, corner, gate, and terminal posts. These tension bands are made from durable galvanized steel and are installed by wrapping around a pipe and then secured with a nut or carriage bolt.
Key Features:
- For Use In Residential Chain Link Fences
- Uses a 5/16" Carriage Bolt
- Made From Pressed Steel
- Available Sizes From 1 3/8" [1 3/8" OD] To 8 5/8" [8 5/8" OD]
- Sturdy Construction Will Provide Use For Many Years
Heavy Tension Bands
These tension bands are created for industrial or manufacturing use. They are thicker than the standard tension band but are still made from galvanized steel. Heavy tension bands are also routinely used for higher fences with large posts.
Key Features:
- For Use In Industrial Chain Link Fences
- Uses a 5/16" Carriage Bolt
- Made From Pressed Steel
- Available Sizes From 1 5/8" [1 5/8" OD] To 8 5/8" [8 5/8" OD]
- Heavy-Duty Construction Provides More Protection From Adverse Weather Conditions
Beveled Tension Bands
Beveled tension bands are like heavy and standard tension bands. However, they have a unique beveled edge that makes climbing difficult. Often used in correctional facilities or other high-security areas, these tension bands will stop individuals from climbing a chain link fence. This is the correct tension band if you need added safety and security for your chain link fence.
Key Features:
- For Use In High-Security Areas Such As (Detainment Centers, Government Buildings, And Industrial Zones)
- Uses a 5/16" Carriage Bolt
- Made From Pressed Steel
- Available Sizes From 1 3/8" [1 3/8" OD] To 8 5/8" [8 5/8" OD]
- Beveled Edge Stops Individuals From Climbing Fence
A Quick Comparison Chart Of All Available Tension Bands
| Beveled Tension Band | Heavy Tension Band | Standard Tension Band |
|---|---|---|
| Made From Galvanized Steel | Made From Galvanized Steel | Made From Galvanized Steel |
| Not Easy To Climb With Beveled Edge | Made From Thick Galvanized Perfect For Industrial Use | The Standard Tension Band Used For Residential Chain Link Fencing |
| Gauge Size: 12 | Gauge Size: 11 | Gauge Size: 14 |
| Sizes From 1 3/8" [1 3/8" OD] To 8 5/8" [8 5/8" OD] | Sizes From 1 5/8" [1 5/8" OD] To 8 5/8" [8 5/8" OD] | Sizes From 1 3/8" [1 3/8" OD] To 8 5/8" [8 5/8" OD] |
| Carriage Bolt Size: 5/16" | Carriage Bolt Size: 5/16" | Carriage Bolt Size: 5/16" |
